Please confirm topic selection

Are you sure you want to trigger topic in your Anconeus AI algorithm?

Please confirm action

You are done for today with this topic.

Would you like to start learning session with this topic items scheduled for future?

Distal Radius Fractures
Updated: Oct 9 2017

Distal Radius Fracture Non-Spanning External Fixator

Preoperative Patient Care
Operative Techniques
E

Preoperative Plan

1

Identify fracture characteristics

  • distal radius fracture pattern
  • bone quality
  • DRUJ disruption
  • amount of comminution
  • presence of intra-articular extension(s)

2

Execute surgical walkthrough

  • describe key steps of the procedure to the attending verbally prior to the start of the case
  • describe potential complications and steps to avoid them
F

Room Preparation

1

Surgical Instrumentation

  • non-spanning external fixator set

2

Room setup and Equipment

  • setup OR with standard operating table and radiolucent hand table
  • turn table 90° so that operative extremity points away from anesthesia machines
  • c-arm perpendicular to hand table with monitor in surgeon's direct line of site

3

Patient Positioning

  • supine with shoulder at edge of bed centered at level of patient’s shoulder
  • hand centered on hand table, supinate arm
  • arm tourniquet placed on arm with webril underneath (optional)
G

Closed Reduction

1

Perform reduction

  • use manipulation with traction and countertraction
  • shake hand of the manipulated wrist and manipulate wrist using three using three point bending principles
H

Proximal Fixator Pins

1

Locate pin placement

  • identify radius 10cm proximal to the radial styloid
  • can also be at least 5cm outside the zone of injury
  • look for the bare area that is located in the palpable interval between the brachioradialis and the ECRL muscles

2

Make small incisions at pin sites

  • be sure to protect the branches of the superficial radial and lateral antebrachial cutaneous nerves
  • damage to these nerves can cause a painful neuroma

3

Place proximal pins in a dorsal volar direction

  • visualize the periosteum
  • drill holes
  • place half pins
  • use a fixator clamp after the placement of the first half pin to determine the placement of the second half pin

4

Check the placement and depth of the pins with fluoroscopy

I

Distal Fixator Pins

1

Identify Pin Placement

  • make 2 cm incisions between the 2-3 and 4-5 dorsal compartments

2

Place pins

  • place the 3 mm half pins are placed on either side of Listers tubercle
  • use fluoroscopic guidance
  • be sure to protect the EPL tendon
  • place the ulnar pin first
  • this pin should be parallel to the subchondral surface of the lunate facet
  • place radial pin
  • does not need to be parallel if the clamps are modular

3

Check pin placement with fluoroscopy

  • be sure the threads of the half pins are fully threaded in the far cortex
J

Assemble the External Fixator

1

Close skin without tension

  • apply pin to rod connectors
  • place clamps one fingerbreadth away from skin
  • make sure thumb and wrist motion are not blocked

2

Connect rods

  • loosely connect rod proximally first
  • secure the rod distally
  • place second rod to increase stiffness of overall frame

3

Check reduction with fluoroscopy

4

Lock clamps in place

5

Perform a final tightening

6

Dress Pin Sites

  • place petroleum gauze and bulky dressing
Postoperative Patient Care
Private Note

Attach Treatment Poll
Treatment poll is required to gain more useful feedback from members.
Please enter Question Text
Please enter at least 2 unique options
Please enter at least 2 unique options
Please enter at least 2 unique options